Before cleaning with Mr. Eats-It Hydrocarbon.
Hose rinse after two hours.
railroad pits
These photos were taken at the Burlington Northern Santa Fe (BNSF) Locomotive Repair Shop, Lincoln, Nebraska. It was a pit restoration project and the work was completed by Utility Maintenance Contractors out of Wichita, KS.
Mr. Eats-It Hydrocarbon was used to clean and remediate the dirt, oils and fuel so a non-slip coating could be applied.
Mr. Eats-It Hydrocarbon was spray applied and scrubbed in and let stand for 2 hours before it was rinsed away assuring that the surface and the pours of the concrete were clean and free of contaminants.
The photo below is the coated floor after it was cleaned with Mr. Eats-It Hydrocarbon.
Finished coated work pit after preparing with Mr. Eats-It Hydrocarbom.
elEVATOR PITS
Elevator pits, just like railroad pits or auto oil changing pits, get dirty with oil, grease, metal shavings and dirt. Mr. Eats-It Hydrocarbon literally eats hydrocarbons, that is, oil, grease, diesel fuel, etc. Mr. Eats-It Hydrocarbon is the professional's choice for pit cleaning and remediating.